The Shelly 1L is the No Neutral No Nonsense brother of the Shelly 1 Relay.
It's little magic trick is that it doesn't require a neutral wire to work.
These little beauties go in behind your existing wall switches or powerpoints to make them 'Smart'.
Perfect for those who like the aesthetics of their current switches and don't want to swap them out or maybe the other half isn't so keen on new technology and wants the feel of classic switches.
The WiFi Relay Switch Shelly 1L can control 1 electrical circuit up to 1кW load. It is intended to be mounted into a standard in-wall console, behind power sockets and light switches or other places with limited space. Shelly may work as a standalone Device or as an accessory to another home automation controller.
Supported load types (with and without neutral):
• Resistive - for example lights, electric heaters, etc. • Inductive for example LED lights, transformers, fans, motors, etc. • Capacitive for example motor starting capacitors, generators, synchronous motors, etc.
Supported light types:
• Incandescent lamps • Fluorescent lamps • Halogen lamps • Dimmable LED • Non Dimmable LED • Fluorescent tubes • Neon lamps
Operational range (depending on local construction)
Up to 50 m outdoors, up to 30 m indoors
< 1 W
Australia and New Zealand Safety Standard (AS/NZS) compliant, SDoC available on request.
*When using the device without neutral, Shelly 1L requires at least 20W of power consumption, in order to operate. If the connected light has a smaller power consumption, then Shelly Bypass is required for the operation of the Device! Shelly Bypass is accessory that will be sold separately! Available on request.